[XviD-devel] msvc build environment [was: no subject]

[A AP]

pete writes: 

> On Sun, 01 Apr 2007 18:30:43 +0100 "A AP" <snopa at freeuk.com> wrote:
>> Hello everybody 
> [...]
>> 
>> THE QUESTION:
>> How should I configure my Visual C++ with the generated files (core and 
>> vfw)?
>> If someone have already compiled XVID using Visual C++, can explain me the 
>> necessary steps. 
> 
> you have reported two seperate problems, i'll take a stab at both of
> them. 
> 
> the "Debug/MyProgramXVID.exe" fails to link because you have not instructed
> your linker to link against the xvidcore static library (xvidcore.lib). this
> is not an xvid problem per-se, rather it reflects your experience with
> the msvc toolchain. 
> 
> solution:
> in msvc goto to project->settings->link, then add "xvidcore.lib" to the
> list of object/module libraries. Depending on your directory layout, you
> probably will need to add the xvidcore.lib path to the linker path list.
> this can be done from the "Input Category" under project->settings->link. 
> 
> the second problem is a hack introduced many years ago into the vfw
> build process. after compiling xvidvfw.dll, the msvc project attempts to
> execute the following dos command '' 
> 
> copy "..\build\win32\bin\xvidcore.dll" ".\bin" 
> 
> ''. it your case, the command seems to fail. this could be due to many
> reasons. if you wish to delete or edit the command, goto 
> project->settings->post-link within msvc. 
> 
> ope this helps. 
> 
> -- pete
> _______________________________________________
> XviD-devel mailing list
> XviD-devel at xvid.org
> http://list.xvid.org/mailman/listinfo/xvid-devel 
> 

First of all, thanks PETE for your answer. 

...but it doesn't work yet. 

I'm going to explain my msvc configuration: 

 - In the project->settings->link (Win32 Debug & Release):
  "vfw32.lib winmm.lib xvidvfw.lib" 

 - In the Tools->Options->Directory (library files)
  (The path where I have put the xvidvfw.lib file: "C:\XVID\lib") 

 - In project->settings->post-link (Do you refer to "Post-build step"?)
  (nothing) 

 - I've copy the xvidcore.dll file in my "MSVC_PATH\bin" directory 

________________________________ 

If I put the include "#include "xvid\encoder.h", appears the next message: 

 -----
portab.h(93) : fatal error C1189: #error :  You are trying to compile XviD 
without defining address bus size.
 ----- 

..I'm totally get lost 

THANKS IN ADVANCE.
Albert.